DE1000/200 Dewatering Pumpset
Compact Sound Attenuated 200mm Pumpset Stage 5 Final Compliant
(Emission Compliant for EU Markets)
DE1000/200- Around your clock, around your world is the fundamental philosophy of the company and that particularly applies to those requiring the work operations to remain dry during periods of wet weather such as mines in tropical regions to construction sites along coastlines and rivers.
No job is too small, too large, or too deep for DXB Pump & Power with the broadest range of dry prime dewatering pumps from 50mm to 750mm in size capable of flows up to 8000m3/hr and pressures in excess of 25 bar.
Our standard designs are available either in basic open skid design or at the other end of the range is the acoustic enclosed, fully bunded canopies and containers with integrated fuel tanks certifications to CSC standards allowing for international shipping.
Powered by Stage 5 engines for European markets, Tier 4 Final for the Americas and finally Stage 3 for lesser compliant markets, all of DXB Pump & Power pumpsets are specifically designed for the most arduous applications including those seen offshore, mines in remote regions and of course geographically remote regions like the Arctic regions or Middle Eastern deserts.
Available in sizes from 38mm to 750mm in size capable of flow rates up to 8000m3/hr and pressures.
|Pumpset Discharge Size||200|
|Maximum Flow (m3/hr)||1702|
|Maximum Head (m)||240|
|Solids Handling Size (mm)||60|
|Maximum Speed (rpm)||1860|
|Maximum Power Required (kW)||782|
|Maximum Power Required (kW) at BEP (1860rpm)||717|
|Fuel Consumption (lph) at BEP (1860rpm)||215|
|Fuel Tank Size (Litres)||N/A|
|Maximum Run Time at BEP (1860rpm) (integral fuel tank)||N/A|
|Sound Rating at 7m||70|
|Dry Weight (kg)||7500|
|Wet Weight including fuel (kg)||8000|
|Dimensions (LxWxH) m||5 x 2 x 2.5|
|Engine Type||CAT C32|
|Emission rating||Stage 5|
|Maximum Continuous Power||665|
- Quarry Dewatering
- Mine Dewatering
- Washplant feed Pumps
- Construction Dewatering
- Pipe line filling
- Screened waste water
- Industrial waste water
- Booster sets
- Stand-by fire pumps
- Irrigation pumps
CD4MCu Stainless Steel Construction
Corrosion and wear resistant material for more arduous applications. With pH challenges or light entrained solids often seen in dirty water mining applications or mud pumping.
Trailer or crash-frame
DXB are able to add more functionality to the e-range pumpsets by offering them as road legal trailers. Complete with pipe racks and accessory boxes as required. The company can also offer these pumpsets with an optional crash-frame as well.
RIGSAFE or ATEX configurations
DXB is experienced in designing and building pumpsets for use in explosive environments such as refineries and mining applications.
Remote monitoring and control
Through advanced electronics and control systems, DXB is able to offer remote monitoring systems of pumping equipment from centralised control locations using GSM and other technologies.
Cycloseal® System for extended seal life
Patented, self contained, single mechanical, seal housed in a dished backplate. Creating a cyclonic effect for efficient solids removal from seal area extending seal life and reliability.
Redi-Prime® dry prime technology
Positive sealing float box with 50cfm diaphram vacuum pump. Combined with oversized suction spools. Creating market leading suction lift capabilities and reliability of service.
Ductile and GG30 Gray Iron Construction
High quality materials of construction. Prolonging lifetime operation and reducing overall cost of ownership.
High Efficiency Impeller Designs with a maximum 78% on clear liquid pumps
Enclosed two vane impellers. Offering market leading performance and the lowest fuel consumption of any manufacturer
High quality materials of construction prolonging lifetime operation and reducing overall cost of ownership.
- Stage V Final Emission Compliant
- Maximum flow 1700m3/hr
- Maximum Head 240m
- Best Efficiency Point (BEP) 1000m3/hr at 200m head
- 215 litres of fuel per hour
- Suction lift to 7m
- Outstanding NPSHr characteristics
- 60 mm solids handling capability
- 76% efficiency
- Compact and lightweight
- Maximum 1860rpm at 70 dB(A)
- LEZ operation compliant